View XQEAWT-00-0000-00000LCE4_7610520.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product family data sheet copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. cld-ds83 rev 1 cree ? xlamp ? xq-e leds product description the xlamp ? xq- e le d family packs the lighting-class performance of the xp- e 2 into a package that is 78 percent smaller. the compact xq- e le d enables lighting manufacturers to signifcantly reduce the size and total cost of their l e d luminaires, without sacrifcing light output, effcacy or reliability. the new xq- e l e ds open up new design possibilities for a wide spectrum of lighting applications such as portable, indoor directional, architectural or vehicle lighting. the xq-e s combination of consistent design across all confgurations and its small size permit improved color mixing and optical control, compared to the larger xp-e2 le d. features ? crees smallest lighting class led: 1.6 x 1.6 x 1.44 mm ? available in 70- and 80-minimum cri white, blue, green, pc amber, red - orange & red ? 1 a maximum drive current ? wide viewing angle: white 110, blue, green & pc amber, 125, red - orange & red 130 ? refow solderable - jedec j-std-020c compatible ? unlimited foor life at 30 c/85% rh ? rohs -compliant ? ul - recognized component (e349212) www. cree.com/xlamp cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 table of contents characteristics .......................... 2 flux characteristics - white ........ 3 flux characteristics - color ......... 4 relative spectral power distribution ............................... 6 relative flux vs. junction temperature ............................. 7 e lectrical characteristics ............. 8 relative flux vs. current ............ 9 typical spatial distribution ......... 10 thermal design ........................ 11 refow soldering characteristics . 12 notes ...................................... 13 mechanical dimensions .............. 14 tape and reel .......................... 15 packaging ................................ 16
2 characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point - white, blue c/w 6 thermal resistance, junction to solder point - green c/w 9 thermal resistance, junction to solder point - pc amber c/w 8 thermal resistance, junction to solder point - red- orange, red c/w 5 viewing angle (fwhm) - white degrees 110 viewing angle (fwhm) - blue, green, pc amber degrees 125 viewing angle (fwhm) - red- orange, red degrees 130 temperature coeffcient of voltage - white mv/c -2.3 temperature coeffcient of voltage - blue mv/c -3.3 temperature coeffcient of voltage - green mv/c -3.8 temperature coeffcient of voltage - pc amber mv/c -3.3 temperature coeffcient of voltage - red - orange, red mv/c -1.8 esd withstand voltage (hb m per m il-std-883d)- white, blue, green v 8000 esd classifcation (hbm per m il-std-883d) - p c amber, red- orange, red class 2 dc forward current ma 1000 reverse voltage v 5 forward voltage (@ 350 ma, 85 c) - white v 2.9 3.25 forward voltage (@ 350 ma, 25 c) - blue v 3.1 3.5 forward voltage (@ 350 ma, 25 c) - green v 3.2 3.6 forward voltage (@ 350 ma, 25 c) - pc amber v 3.1 3.5 forward voltage (@ 350 ma, 25 c) - red- orange, red v 2.2 2.6 le d junction temperature c 150 copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
3 flux characteristics - white (t j = 85 c) the following table provides several base order codes for xlamp xq- e white le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xq family leds binning and labeling document. color cct range base order codes min. luminous flux (lm) @ 350 ma calculated minimum luminous flux (lm)** @ 85 c order code min. max. group flux (lm) @ 85 c flux (lm) @ 25 c* 700 ma 1.0 a cool white 5000 k 8300 k r2 114 132 196 252 xqe awt-00-0000-00000lee1 q5 107 124 184 237 xqe awt-00-0000-00000lde1 70-cri white 3700 k 8300 k r2 114 132 196 252 xqe aw t-00-0000-00000bee1 q5 107 124 184 237 xqe aw t-00-0000-00000bde1 neutral white 3700 k 5300 k r2 114 132 196 252 xqe awt-00-0000-00000lee4 q5 107 124 186 236 xqe awt-00-0000-00000lde4 q4 100 116 172 221 xqe awt-00-0000-00000lce4 80-cri white 2700 k 3500 k q4 100 116 172 221 xqe aw t-00-0000-00000hce7 q3 93.9 111 162 208 xqe aw t-00-0000-00000hbe7 q2 87.4 101 150 193 xqe aw t-00-0000-00000hae7 warm white 2700 k 3500 k q4 100 116 172 221 xqe awt-00-0000-00000lce7 q3 93.9 111 162 208 xqe aw t-00-0000-00000lbe7 q2 87.4 101 150 193 xqe awt-00-0000-00000lae7 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. ? typical cri for cool white (5000 k C 8300 k cct) is 70. ? typical cri for neutral white (3700 k C 5300 k cct) is 75. ? typical cri for warm white (2700 k C 3500 k cct) is 80. ? minimum cri for 70-cri white is 70. ? minimum cri for 80-cri white is 80. * flux values @ 25 c are calculated and for reference only. ** calculated fux values at 700 ma and 1 a are for reference only. copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
4 flux characteristics - color (t j = 25 c) the following table provides several base order codes for xlamp xq- e color le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xq family leds binning and labeling document. color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) blue b3 465 b6 485 m2 39.8 xqeblu-00-0000-000000201 k3 35.2 xqeblu-00-0000-000000z01 k2 30.6 xqeblu-00-0000-000000y01 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) green g2 520 g4 535 r2 114 xqegrn-00-0000-000000e01 q5 107 xqegrn-00-0000-000000d01 q4 100 xqegrn-00-0000-000000c01 q3 93.9 xqegrn-00-0000-000000b01 color color bin base order codes min. luminous flux (lm) @ 350 ma order code group flux (lm) @ 25 c* pc amber y2 p4 80.6 xqe apa-00-0000-000000901 p3 73.9 xqe apa-00-0000-000000801 copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds note: cree maintains a tolerance of 7% on fux and power measurements and 1 nm on dominant wavelength measurements.
5 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) red- orange o3 610 o4 620 q2 87.4 xqerdo-00-0000-000000a01 p4 80.6 xqerdo-00-0000-000000901 p3 73.9 xqerdo-00-0000-000000801 p2 67.2 xqerdo-00-0000-000000701 color dominant wavelength range base order codes min. luminous flux (lm) @ 350 ma order code min. max. group dwl (nm) group dwl (nm) group flux (lm) red r2 620 r3 630 p3 73.9 xqered-00-0000-000000801 p2 67.2 xqered-00-0000-000000701 n4 62 xqered-00-0000-000000601 n3 56.8 xqered-00-0000-000000501 flux characteristics - color (t j = 25 c) - continued copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds note: cree maintains a tolerance of 7% on fux and power measurements and 1 nm on dominant wavelength measurements.
6 relative spectral power distribution relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) cool white warm white relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) blue green pc amber red - orange red copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
7 relative flux vs. junction temperature (i f = 350 ma) relative flux output vs. junction temperature 0 20 40 60 80 100 120 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) white relative flux output vs. junction temperature 0 10 20 30 40 50 60 70 80 90 100 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) blue green pc amber red - orange, red copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
8 electrical characteristics (t j = 85 c) electrical characteristics (t j = 25 c) electrical characteristics (tj = 85oc) 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) white electrical characteristics (tj = 85oc) 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) blue green pc amber red - orange, red copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
9 relative flux vs. current (t j = 85 c) relative flux vs. current (t j = 25 c) relative intensity vs. current (tj = 85oc) 0 50 100 150 200 250 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux (%) forward current (ma) white relative intensity vs. current (tj = 85oc) 0 50 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux (%) forward current (ma) blue green pc amber red - orange, red copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
10 typical spatial distribution typical spatial radiation pattern-white 0 20 40 60 80 100 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) white typical spatial radiation pattern-royal blue, blue, green, amber, red-orange, red 0 20 40 60 80 100 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) blue, green pc amber red - orange, red copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
11 thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics . white blue green pc amber red-orange, red thermal design - white 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w thermal design - royal blue, blue 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w thermal design - green 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w rj - a = 30 c/w thermal design - amber, red-orange, red 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w thermal design - pc amber 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w rj - a = 30 c/w copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
12 reflow soldering characteristics in testing, cree has found xlamp xq-e leds to be compatible with jedec j-std-020c, using the parameters listed below. a s a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all p cb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3 c/second max. 3 c/second max. preheat: temperature min (ts min ) 100 c 150 c preheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds p eak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
13 notes lumen maintenance projections cree now uses standardized ies l m -80-08 and tm -21-11 methods for collecting long-term data and extrapolating led lumen maintenance. for information on the specifc l m -80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. moisture sensitivity in testing, cree has found xlamp xq-e leds to have unlimited foor life in conditions 30 oc/85% relative humidity (rh). m oisture testing included a 168-hour soak at 85 oc/85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. cree recommends keeping xlamp l e ds in their sealed moisture-barrier packaging until immediately prior to use. cree also recommends returning any unused l e ds to the resealable moisture-barrier bag and closing the bag immediately after use. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . ul recognized component level 1 enclosure consideration. the led package or a portion thereof has not been investigated as a fre enclosure or a fre and electrical enclosure per ansi/ul 8750. vision advisory claim warning: do not look at exposed lamp in operation. e ye injury can result. for more information about le ds and eye safety, please refer to the led e ye safety application note . copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
14 mechanical dimensions all dimensions in mm. measurement tolerances unless indicated otherwise: .xx = .25 mm, .xxx = .125 mm measurement tolerance: .xx = .13 mm 1.60 0.30 1.60 0.50 0.65 0.50 recommended pc board solder pad xq pcb solder pad rev dwg. no. a size title: 5 4 3 2 1 goleta, ca 93117 340 storke rd fax (805) 968-9811 phone (805) 968-9460 xq_pcbsolderpad sheet 1 of 1 50:1 scale m.youmans tolerance unless specified: millimeters & before finish. dimensions are in unless otherwise specified x 1 .xx .13 for sheet metal parts only .x .25 .xx .10 x 2 .x 0.3 drawn by approved material final protective finish check date date date notice of cree inc. cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent third angle projection 8/7/2013 santa barbara technology center 0.30 1.32 1.32 0.51 recommended stencil opening xq stencil opening rev dwg. no. a size title: 5 4 3 2 1 goleta, ca 93117 340 storke rd fax (805) 968-9811 phone (805) 968-9460 xq_stencilopening sheet 1 of 1 50:1 scale m.youmans tolerance unless specified: millimeters & before finish. dimensions are in unless otherwise specified x 1 .xx .13 for sheet metal parts only .x .25 .xx .10 x 2 .x 0.3 drawn by approved material final protective finish check date date date notice of cree inc. cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent third angle projection 8/7/2013 santa barbara technology center recommended pcb solder pad recommended stencil opening 0.30 5.00 5.00 solder pad reference recommended trace layout: mcpcb recommended trace layout: mcpcb rev dwg. no. a size title: 5 4 3 2 1 goleta, ca 93117 340 storke rd fax (805) 968-9811 phone (805) 968-9460 xq_tracelayout-mcpcb sheet 1 of 1 20:1 scale m.youmans tolerance unless specified: millimeters & before finish. dimensions are in unless otherwise specified x 1 .xx .13 for sheet metal parts only .x .25 .xx .10 x 2 .x 0.3 drawn by approved material final protective finish check date date date notice of cree inc. cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent third angle projection 8/7/2013 santa barbara technology center 0.30 10.00 10.00 4.85 solder pad reference recommended trace layout: fr4 recommended trace layout: fr4 rev dwg. no. a size title: 5 4 3 2 1 goleta, ca 93117 340 storke rd fax (805) 968-9811 phone (805) 968-9460 xq_tracelayout-fr4 sheet 1 of 1 10:1 scale m.youmans tolerance unless specified: millimeters & before finish. dimensions are in unless otherwise specified x 1 .xx .13 for sheet metal parts only .x .25 .xx .10 x 2 .x 0.3 drawn by approved material final protective finish check date date date notice of cree inc. cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent third angle projection 8/7/2013 santa barbara technology center recommended trace layout: mcpcb recommended trace layout: fr4 . top view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .300 1.500 3.300 3.300 1.60 1.60 1.44 .05 1.500 .600 .600 .300 1 / 1 45.000 a 2610-00035 xqe outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 recommended pc board solder pad recommended trace layout solder pad reference notch is on cathode(-) side .063 .375 .063 r .936 size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .300 1.500 3.300 3.300 1.60 1.60 1.44 .05 1.500 .600 .600 .300 1 / 1 45.000 a 2610-00035 xqe outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 recommended pc board solder pad recommended trace layout solder pad reference notch is on cathode(-) side .063 .375 .063 r .936 size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .300 1.500 3.300 3.300 1.60 1.60 1.44 .05 1.500 .600 .600 .300 1 / 1 45.000 a 2610-00035 xqe outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 recommended pc board solder pad recommended trace layout solder pad reference notch is on cathode(-) side .063 .375 .063 r .936 side view bottom view copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
15 tape and reel all cree carrier tapes conform to eia -481d, a utomated component handling systems standard. all dimensions in mm. measurement tolerances unless indicated otherwise: .xx = .25 mm, .xxx = .125 mm size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 a a .30 .10 3.50 .10 1.85 1.65 1.750 8.000 nominal 8.30 max 1.000 +.10 -.00 1.500 4.000 2.000 revisons rev description by date app'd 1 / 1 4.000 a 2402-00023 carrier tape, 1.7x1.7 xpq 5/31/12 d. cronin notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2mm reference vendor part number 021142 cathode side anode side loaded pockets (2,000 lamps) leader 400 mm (min) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) trailer 160 mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 2.5 .1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 13 mm 7" cover tape pocket tape user feed direction user feed direction copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds
16 packaging the diagrams below show the packaging and labels cree uses to ship xlamp xq- e le ds. xlamp xq-e le ds are shipped in tape loaded on a reel. e ach box contains only one reel in a moisture barrier bag. patent label (on bottom of box) label with cree bin code, qty, reel id label with cree bin code, qty, reel id label with cree order code, qty, reel id, po # label with cree order code, qty, reel id, po # label with cree bin code, qty, reel id unpackaged reel packaged reel boxed reel cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2013-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. xlamp ? xq-e leds

▲Up To Search▲

Price & Availability of XQEAWT-00-0000-00000LCE4

	To Download XQEAWT-00-0000-00000LCE4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .